I. Fixing of stainless steel screwsIn short, this means that stainless steel screws can be applied to the raw materials of the product, which will make the stainless steel screws not easy to fall. Screws must be securely connected to the raw material of the product. There are always two solutions fo

1. First, remove the sludge on the surface of broken screws and broken ends and bludgeon the center of the section to death. Then, install a 6-8mm diameter drill bit with an electric drill to drill the center bludgeon hole. After the hole is drilled, remove the small bit and replace it with a 16 mm

1Kazari sealKazari seal: This is a forced seal, with external thread Kazari seal, internal thread Kazari seal and improved Kazari seal in three forms. The external thread kazari seal is the most used. Its gasket is a soft metal gasket with a triangular cross-section, made of copper or aluminum. The

Fastener screws need to be inspected before or after production before they can be formally put into use. Therefore, in order to get better use effect of fastener screws, we must be careful and careful when carrying out these inspections. According to the summary experience, China Standard Parts Net

Materiais不锈钢材质C碳Si 矽Mn锰P磷S硫Ni 镍Cr 铬Mo钼Cu 铜SUSXM7 (302 HQ)Max 0.03Max 1.00Max 2.00Max 0.045Max 0.0308.00~10.0017.00~19.00—3.00~4.00SUS 304 (304 M)Max 0.08M

The 2020 China (Jiaxing) Fastener Industry Expo will be held on October 28-30, 2020. The 2020 China (Jiaxing) Fastener Industry Expo (hereinafter referred to as "Jiaxing Fastener Expo") will be held at the Jiaxing International Convention and Exhibition Center in Zhejiang held with grandeur.Affected