Article List

• Do bolts and nuts need spacers

  Refers to the part between the connecting piece and the nut. A flat metal ring used to protect the surface of the connector from chafing by the nut and to disperse the pressure of the nut on the connector.Washer is divided into: flat washer - C level, large washers - A and C level, large washers - C

  August 01, 2022
• Precautions for welding nuts

  Although the strength of the welding nut is large, it is not easy to loose, but in the use of the process also need to pay attention to some matters, so that the welding nut connection use. The so-called welding is to turn two separate parts into a whole, and mix them together after melting the meta

  July 25, 2022
• Usage and precautions of countersunk head screws

  Countersunk head screws are used in the need to install, the surface of the parts can't be raised, and there were two kinds of thickness of the fastening parts, so-called thick, that is to say the fastening parts thickness is greater than the countersunk head screw head thickness, bolt tightening, t

  July 18, 2022
• Brief introduction to the application field of wing nut

  The application scope of wing nut is not very wide, but it is absolutely not small, the shape of wing nut is wing type, this is the characteristics of her appearance, not only the shape, he himself is also featured, special characteristics, high temperature resistance and so on, so what are the uses

  July 11, 2022
• Precautions for the use of stainless steel drilling screws

  Because stainless steel and carbon steel are essentially different, stainless steel has better extensibility, improper use of simple lead to screw can not smoothly enter, the binding force is not strong. Precautions for the use of stainless steel drilling screws are as follows: Before using, confirm

  June 27, 2022
• Installation and installation of expansion bolts

  Expansion bolt refers to a special threaded connection used to secure pipe supports/lifts/brackets or equipment to walls, floors and columns. When using the expansion bolt, drill holes of corresponding sizes on the fixing body with the impact electric drill (hammer) first, and then put the bolt and

  June 14, 2022
• Bolt fastening solution

  Original title: Bolt fastening SolutionsAt present, almost all bolts used in industry need to be controlled, which is the so-called torque control torque refers to the use of predetermined torque or predetermined torque and Angle, to carry out industrial fastening, in order to ensure enough clamping

  June 06, 2022
• Nuts and bolts operation method

  Tighten bolts and nuts according to the following standards. There is a lot of work to tighten threads when assembling mechanical parts. In fastening operations, tools play an important role, through the correct use of the most suitable tool for the operation, can carry out the correct operation, wh

  May 30, 2022
• How Many Bolts Hold The Transmission To The Engine​

  When working on or maintaining a vehicle, one of the most fundamental questions that arise is how to secure the transmission to the engine. The connection between these two vital components is made possible by the use of bolts, which hold everything together and ensure that the transmission function

  Industry Hotspots January 15, 2025
• What's Trina's Solar Panel Energy Generation Cost?

  What's Trina's Solar Panel Energy Generation Cost?In recent years, solar energy has become a popular and sustainable solution for homeowners and businesses looking to reduce their carbon footprint and lower electricity costs. As more people transition to solar panels, understanding the energy genera

  Industry Hotspots January 15, 2025