M50 X 1.5 Stainless Steel Hex Thin Locking Lug Nuts for Mag Wheels
Product Description
Stainless Steel Hex Thin Locking Lug Nuts
Goshen's hex thin locking lug nuts for mag wheels are made of 304/316 stainless steel, which has a bright color, less corrosion and a lot of size.
Specification
Thread size | M3 | M4 | M5 | M6 | M7 | M8 | M10 | M12 | M14 | M16 | |||
d | |||||||||||||
P | Screw pitch | Coarse teeth | 0.5 | 0.7 | 0.8 | 1 | 1 | 1.25 | 1.5 | 1.75 | 2 | 2 | |
Fine Tooth 1 | / | / | / | / | / | 1 | 1 | 1.5 | 1.5 | 1.5 | |||
Fine Tooth 2 | / | / | / | / | / | / | 1.25 | 1.25 | / | / | |||
da | Min | 3 | 4 | 5 | 6 | 7 | 8 | 10 | 12 | 14 | 16 | ||
Max | 3.45 | 4.6 | 5.75 | 6.75 | 7.75 | 8.75 | 10.8 | 13 | 15.1 | 17.3 | |||
dw | Min | 4.6 | 5.9 | 6.9 | 8.9 | 9.6 | 11.6 | 15.6 | 17.4 | 20.5 | 22.5 | ||
e | Min | 6.01 | 7.66 | 8.79 | 11.05 | 12.12 | 14.38 | 18.9 | 21.1 | 24.49 | 26.75 | ||
h | Max=Nominal | 3.7 | 4.2 | 5.1 | 6 | 7 | 8 | 10 | 12 | 14 | 16 | ||
Min | 3.4 | 3.9 | 4.8 | 5.7 | 6.5 | 7.5 | 9 | 11 | 12 | 14 | |||
mw | Min | 1.65 | 2.2 | 2.75 | 3.3 | 3.85 | 4.4 | 5.5 | 6.6 | 7.7 | 8.8 | ||
s | Max=Nominal | 5.5 | 7 | 8 | 10 | 11 | 13 | 17 | 19 | 22 | 24 | ||
Max=Nominal | 5.32 | 6.78 | 7.78 | 9.78 | 10.73 | 12.73 | 16.73 | 18.67 | 21.67 | 23.67 |
Materials
304 Chemical Composition(%) | ||||||||
Grade | C≤ | Mn≤ | Si≤ | S≤ | P≤ | Cr | Ni | N≤ |
0.08 | 2 | 0.75 | 0.03 | 0.045 | 18.0-20.0 | 8.0-10.5 | 0.1 |
304 Mechanical property | |||
σb≥ | σ0.2≥ | δ5 (%)≥ | Hardness(HB)(kgf/mm2)] |
520(Mpa) | 205(Mpa) | 40% | ≤187 HRB≤90 HV ≤200 |
316 Chemical Composition(%) | ||||||||||
Grade | C≤ | Mn≤ | Si≤ | S≤ | P≤ | Cr | Ni | Cu | MO | N |
0.017 | 0.98 | 0.25 | 0.0016 | 0.0414 | 16.23 | 10.08 | 0.32 | 2.06 | 0.037 |
316 Mechanical property | |||
σb≥ | σ0.2≥ | δ5 (%)≥ | Hardness(HB)(kgf/mm2)] |
520(Mpa) | 205(Mpa) | 40% | ≤187 HRB≤90 HV ≤200 |
Bulk in master cartons, then on pallets, or according to customers' requirement.
Q:What is your main products?
A:Fasteners, Bolt, nut, screws, washer, threaded rod, anchors, self tapping screws, self driling screws, stainless steel plate, etc.
Q: What is your delivery time?
A:It depends on if we have stock or not, if we have stock goods, we can delivery within 2 days after receive the payment. And normally our production is in 20-30 days for one container (20-26 ton) products.
Size chart
d | P | h | m | s | ||
max | min | max | min | |||
M3 | 0.5 | 4 | 3.7 | 2.4 | 5.5 | 5.32 |
M4 | 0.7 | 5 | 4.7 | 2.9 | 7 | 6.78 |
M5 | 0.8 | 5 | 4.7 | 3.2 | 8 | 7.78 |
M6 | 1 | 6 | 5.7 | 4 | 10 | 9.78 |
M7 | 1 | 7.5 | 7.14 | 4.7 | 11 | 10.73 |
M8 | 1/1.25 | 8 | 7.64 | 5.5 | 13 | 12.73 |
M10 | 1/1.25/1.5 | 10 | 9.64 | 6.5 | 17 | 16.73 |
M12 | 1.25/1.5/1.75 | 12 | 11.57 | 8 | 19 | 18.67 |
M14 | 1.5/2 | 14 | 13.3 | 9.5 | 22 | 21.67 |
M16 | 1.5/2 | 16 | 15.3 | 10.5 | 24 | 23.67 |
M18 | 1.5/2/2.5 | 18.5 | 17.66 | 13 | 27 | 26.16 |
M20 | 1.5/2/2.5 | 20 | 18.7 | 14 | 30 | 29.16 |
M22 | 1.5/2/2.5 | 22 | 20.7 | 15 | 32 | 31 |
M24 | 2/3 | 24 | 22.7 | 15 | 36 | 35 |
M27 | 2/3 | 27 | 25.7 | 17 | 41 | 40 |
M30 | 2/3.5 | 30 | 28.7 | 19 | 46 | 45 |
M33 | 2/3.5 | 33 | 31.4 | 22 | 50 | 49 |
M36 | 3/4 | 36 | 34.4 | 25 | 55 | 53.8 |
M39 | 3/4 | 39 | 37.4 | 27 | 60 | 58.8 |
M42 | 3/4.5 | 42 | 40.4 | 29 | 65 | 63.8 |
M45 | 3/4.5 | 45 | 43.4 | 32 | 70 | 68.1 |
M48 | 3/5 | 48 | 46.4 | 36 | 75 | 73.1 |