Goshen Professionally produced fastener DIN standard

• 六角头木螺钉 Din 571 
• 内六角紧定螺钉—凹端 Din 916 
• 内六角紧定螺钉—截锥端 Din 914 
• 弹簧垫圈 DIN 128 
• 十字槽圆头螺钉 DIN 7996 
• 牙条 DIN 975 
• 开槽盘头螺钉 DIN 85-72 
• 十字槽球面圆柱头螺钉 DIN 7985-86 
• 内六角紧定螺钉—导向圆柱端 Din 915 
• 内六角紧定螺钉—平端 Din 913 
• 六角法兰面螺母 DIN EN 1661 
• 1型六角螺母—产品等级A和B级 DIN EN ISO 4032 
• 方螺母—产品等级C级 DIN 557 
• 六角凸缘头自钻自攻螺钉 DIN EN ISO 15480 
• 十字槽盘头自钻自攻螺钉 DIN EN ISO 15481 
• 平圆头方颈螺栓 DIN 603 
• 圆柱头内六角螺钉 DIN EN ISO 4762 
• 内六角平圆头螺钉 DIN EN ISO 7380 
• 薄圆柱头内六角螺钉 DIN 6912 
• 六角头螺栓—全螺纹—产品等级A和B级 DIN EN ISO 4017 
• 螺杆 DIN 976-1 
• 内六角沉头螺钉 DIN EN ISO 10642 
所有DIN标准
螺栓 
• 焊接螺栓 Weld screws with metric head
DIN 34817 
• 方头凸缘螺栓 Squate head bolts with collar
DIN 478 
• 平圆头方颈螺栓 Mushroom head square neck bolts
DIN 603 
• 沉头带榫螺栓 Flat countersunk nib bolts
DIN 604 
• 沉头高方颈螺栓 Flat countersunk square neck bolts with long square
DIN 605 
• 半圆头带榫螺栓 Cup head nib bolts
DIN 607 
• 沉头短方颈螺栓 Flat countersunk square neck bolts with short square
DIN 608 
• 六角花形大法兰面钢制螺栓 Steel hexalobular head bolts with large flange
DIN 34801 
• 六角头铰制孔用螺栓 Hexagon fit bolts
DIN 609 
• M42-M160*6 六角头螺栓—产品等级B级 M42 to M160*6 hexagon head bolts - Product grade B
DIN 931-2 
• 六角法兰面螺栓—小系列 Hexagon bolts with flange - Small series
DIN EN 1662 
• 六角法兰面螺栓—加大系列 Hexagon bolts with flange - Heavy series
DIN EN 1665 | 代替DIN 6921|DIN 6922 
• 六角头螺栓—－产品等级B级－细杆（杆径近似等于中径） Hexagon head bolts with reduced shank(shank diameter=pitch diameter)-Product grade B
DIN EN 24015 
• 六角头螺栓—产品等级A和B级 Hexagon head bolts - Product grades A and B
DIN EN ISO 4014 | 代替DIN 931-1 
• 六角头螺栓—产品等级C级 Hexagon head bolts - Product grade C
DIN EN ISO 4016 | 代替DIN 601 
• 六角头螺栓—全螺纹—产品等级A和B级 Hexagon head screws - Product grade A and B
DIN EN ISO 4017 | 代替DIN 933 
• 六角头螺栓—全螺纹—产品等级C级 Hexagon head screws - Product grade C
DIN EN ISO 4018 | 代替DIN 558 
• 六角头螺栓—细牙—全螺纹—产品等级A和B级 Hexagon head screws with metric fine pitch thread - Product grade A and B
DIN EN ISO 8676 | 代替DIN 961 
• 六角头螺栓—细牙—产品等级A和B级 Hexagon head bolts with fine pitch thread - Product grades A and B
DIN EN ISO 8765 | 代替DIN 960 
• 钢结构用—大六角头高强度螺栓 High-strength hexagon head bolts with large widths across flats for structural steel bolting
DIN 6914 
• 短螺纹端的六角头铰制孔用螺栓 
DIN 610-84 
• 粗杆六角头螺栓 重量 
DIN 931-87(3) 
• Clevis pins
DIN 1445 
• Plain washers for metric bolts,screws and nuts .for general purposes General plan
DIN EN ISO 887 
• Hexagon head bolts with metric fine pitch thread(Product grade A and B)
DIN EN ISO 8765 
• Thread run-outs and thread undercuts for ISO metric threads as in IND 13-1
DIN 76-1 
• Thread run-outs and thread undercuts
DIN 76 
• Bolt end protrusions
DIN 78 
• Diameters of counterbores(holes)
DIN 974 
• Split pin holes and wire holes in bolts,screws and studs
DIN 34803 
• Bolts,screws,studs and nuts
DIN EN 20225 
• Clearance holes for bolts and screws
DIN EN 20273 
• T形头螺栓 ISO general purpose metric screw threads. General plan
DIN ISO 261 
• 一般用途螺栓和螺钉.米制系列.端头半径 General purpose bolts and screws-metric series
DIN ISO 885 
• T型螺栓 
188 
• T型螺栓 
186 
螺钉 
• 方头短圆柱端紧定螺钉 Square head bolts with short dog point
DIN 479 
• 方头短圆柱球面端紧定螺钉 Square head bolts with collar and oval half dog point
DIN 480 
• 开槽圆柱头螺钉—产品等级A级 Slotted cheese head screws-Product grade A
DIN EN ISO 1207 | 代替DIN 84 
• 开槽沉头螺钉（通用头型）－产品等级A级 Slotted pan head screws-Product grade A
DIN EN ISO 1580 | 代替DIN 85 
• 开槽沉头螺钉（通用头型）－产品等级A级 Slotted countersunk flat head screws(common head style)
DIN EN ISO 2009 | 代替DIN 963 
• 开槽半沉头螺钉（通用头型）－产品等级A级 Countersunk slotted raised head screws(common head style)-Produce grade A
DIN EN ISO 2010 | 代替DIN 964 
• 十字槽盘头凸缘螺钉— 产品等级A级 Product grade A cross recessed pan head screws with collar
DIN 967 
• 十字槽沉头（通用头型）螺钉－产品等级A级－第2部分：性能等级 钢 8.8级、不锈钢和有色金属 Cross recessed countersunk flat head screws (common head style),product grade A-Part2:Steel of property class 8.8,stainless steel and nonferous metals
DIN EN ISO 7046-2 | 代替DIN 965 
• 开槽盘头螺钉 
DIN 85-72 
• 开槽十字孔螺钉 
DIN 404-86 
• 开槽小盘头螺钉 
DIN 920-86 
• 十字槽沉头自钻自攻螺钉 Cross recessed countersunk head drilling screws with tapping screw thread
DIN EN ISO 15482 
• 十字槽半沉头自钻自攻螺钉 Cross recessed raised countersunk head drilling screws with tapping screw thread
DIN EN ISO 15483 
• 内六角紧定螺钉—平端 Hexagon socket set screws with flat point
Din 913 
• 内六角紧定螺钉—截锥端 Hexagon socket set screws with cone point
Din 914 
• 内六角紧定螺钉—导向圆柱端 Hexagon socket set screws with dog point
Din 915 
• 内六角紧定螺钉—凹端 Hexagon socket set screws with cup point
Din 916 
• 十字槽圆头螺钉 Cross recessed round head screws
DIN 7996 
• 十字槽沉头自攻螺钉（通用头型） Cross recessed countersunk (flat) head tapping screws(common head style)
ISO 7050 | 代替DIN 7982 
• 十字槽半沉头自攻螺钉 Cross recessed raised countersunk (oval) head tapping screws
ISO 7051 | 代替DIN 7983 
• 小六角头长圆柱导向端紧定螺钉 Hexagon set screws with small hexangon and full dog point
DIN 561 
• 小六角头短圆柱导向锥端紧定螺钉 Hexagon set screws with samll hexagon,half dog point and flat cone point
DIN 564 
• 钢结构用—大六角头高强度螺栓和六角螺母连接副 Steel hexagon fit bolts for structural steel bolting for supply with hexagon nuts
DIN 7968 
• 钢结构用—六角头螺栓和六角螺母连接副 Steel hexagon head bolts for structural steel bolting for supply with hexagon nuts
DIN 7990 
• 十字槽半沉头（通用头型）螺钉－产品等级A级 Countersunk raised head screws (common head style) with type H or type Z cross recess-Product grade A
DIN EN ISO 7047 | 代替DIN 966 
• 十字槽圆柱头螺钉 Cross recessed cheese head screws
DIN EN ISO 7048 
• 滚花指旋螺钉 
DIN 464-86 
• 滚花薄头指旋螺钉 
DIN 653-80 
• 带螺杆的六角头螺钉 
DIN 7964-77 
• 开槽大盘头螺钉 
DIN 921-86 
• 十字槽球面圆柱头螺钉 
DIN 7985-86 
• Designation system for fasteners
DIN 962 
• Plastic washers. Standard series
DIN 34815 
• Slotted set screws with flat point
DIN EN 24766 
• Slotted set screws with cone point
DIN EN 27434 
• Slotted set screws with long dog point
DIN EN 27435 
• Slotted set screws with cup point
DIN EN 27436 
• Slotted cheese head screws
DIN EN ISO 1207 
• Slotted pan head screws
DIN EN ISO 1580 
• Slotted countersunk flat head screws (common head style)
DIN EN ISO 2009 
• Countersunk slotted raised head screws(common head style)
DIN EN ISO 2010 
• Slotted headless screws with shand
DIN EN ISO 2342 
• Hexagon head screws(Product grade A and B)
DIN EN ISO 4017 
• Hexagon head screws(Product grade C)
DIN EN ISO 4018 
• Hexagon socket set screws with flat point
DIN EN ISO 4026 
• Hexagon socket set screws with cone point
DIN EN ISO 4027 
• Hexagon socket set screws with dog point
DIN EN ISO 4028 
• Hexagon socket set screws with cup point
DIN EN ISO 4029 
• Hexagon socket head cap screws
DIN EN ISO 4762 
• Pan head screws with H or type Z cross recess(Product grade A)
DIN EN ISO 7045 
• Countersunk flat head screws(common head style)with type H or type Z cross recess(Product grade A)
DIN EN ISO 7046-1 
• Countersunk flat head screws(common head style)with type H or type Z cross recess(Product grade A)
DIN EN ISO 7047 
• Countersunk flat head screws
DIN EN ISO 7048 
• Hexagon socket button head screws
DIN EN ISO 7380 
• Hexagon head screws with metric fine pitch thread(Product grade A and B)
DIN EN ISO 8676 
• Tapping screw and washer assemblies with plain washers
DIN EN ISO 10510 
• Hexagon socket countersunk head screws
DIN EN ISO 10642 
• Hexalobular socket head cap screws
DIN EN ISO 14579 
• Hexalobular socket cheese head screws
DIN EN ISO 14580 
• Hexalobular socket pan head screws
DIN EN ISO 14583 
• Hexalobular socket raised countersunk head screws
DIN EN ISO 14584 
• Scres and washer assemblies with plain washers(Washer hardness classes 200 HV and 300 HV)
DIN EN ISO 10644 
• Hexalobular socket pan head tapping screws
DIN EN ISO 14585 
• Hexalobular socket countersunk head
DIN EN ISO 14586 
• Hexalobular socket raised countersunk(oval)head tapping screws
DIN EN ISO 14587 
• Hexagon washer head drilling screws with tapping screw thread
DIN EN ISO 15480 
• Cross recessed pan head drilling screws with tapping screw thread
DIN EN ISO 15481 
• Cross recessed countersunk head drilling screws with tapping screw thread
DIN EN ISO 15482 
• Cross recessed raisedcountersunk head drilling screws with tapping screw thread
DIN EN ISO 15483 
• Countersinks. For countersunk head screws
DIN 66 
• Countersinks. For countersunk head screws
DIN 74 
• Screw threads
DIN 202 
• Thread rolling screws
DIN 7500 
• Tapping screw connections
DIN 7975 
• Threads and thread ends
DIN 7998 
• Wire thread inserts for ISO metric screw threads
DIN 8140-1 
• Countersunk head screws
DIN EN 27721 
• Tapping screw threads
DIN EN ISO 1478 
• 十字槽螺丝 Cross recesses for screws
DIN EN ISO 4757 
• 螺栓和螺钉用内板拧的六角花形 Hexalobular internal driving feature for bolts and screws
DIN EN ISO 10664 
• 十字槽沉头螺钉 ISO general purpose metric screw threads-tolerances
DIN ISO 965 
• 十字槽沉头螺钉 ISO general purpose metric screw threads-tolerances
DIN ISO 965-2 
• 十字槽沉头螺钉 ISO general purpose metric screw threads-tolerances
DIN ISO 965-3 
• 十字槽沉头螺钉 ISO general purpose metric screw threads-tolerances
DIN ISO 965-4 
• 十字槽沉头螺钉 ISO general purpose metric screw threads-tolerances
DIN ISO 965-5 
内六角螺钉 
• 内六角沉头螺钉 Hexagon socket countersunk head screws
DIN EN ISO 10642 | 代替DIN 7991 
• 薄圆柱头内六角螺钉 Hexagon socket thin head cap screws
DIN 7984 
• 圆柱头内六角螺钉 Hexagon socket head cap screws
DIN EN ISO 4762 | 代替DIN 912 
• 内六角平圆头螺钉 Hexagon socket button head screws
DIN EN ISO 7380 
• 圆柱头内六角花形钢制螺钉 Steel hexalobular head cap screws with large driving feature
DIN 34802 
• 薄圆柱头内六角螺钉 Hexagon socket thin head cap screws with pilot recess for wrench key
DIN 6912 
• 六角花形小法兰面钢制螺栓 Steel hexalobular head bolts with small flange
DIN 34800 
自攻螺钉 
• 六角头自钻自攻螺钉 Hexagon washer head drilling screws with tapping screw thread
DIN EN ISO 15480 | 代替DIN 7504 
• 六角凸缘头自钻自攻螺钉 Hexagon washer head drilling screws with tapping screws thread
DIN EN ISO 15480 
• 十字槽盘头自钻自攻螺钉 Cross recessed pan head drilling screws with tapping screw thread
DIN EN ISO 15481 
• 十字槽盘头自钻自攻螺钉 Cross recessed pan head drlling screws with tapping screw thread
DIN EN ISO 15481 | 代替DIN 7504 
• 十字槽沉头自钻自攻螺钉 Cross recessed countersunk head drilling screws with tapping screw thread
DIN EN ISO 15482 | 代替DIN 7504 
• 十字槽半沉头自钻自攻螺钉 Cross recessed raised counterunk head drilling screws with tapping screw thread
DIN EN ISO 15483 | 代替DIN 7504 
• 自钻自攻螺钉 Drilling screws with tapping screw thread
DIN EN ISO 10666 | 代替DIN 7504 
• 六角头和开槽头三角牙螺钉—尺寸、技术要求及试验 Hexagon head and slotted head thread cutting screws - Dimensions,requirements and testing
DIN 7513 
• 十字槽螺纹滚成自攻螺钉—尺寸、技术要求及试验 Cross recessed head thread cutting screws - Dimensions,requirements and testing
DIN 7516 
• 米制螺纹滚成自攻螺钉—型式、名称及技术要求 ISO metric thread rolling screws - Types,designation and requirements
DIN 7500-1 
• 米制螺纹滚成自攻螺钉—预制孔直径尺寸方案 Tread rolling screws for ISO metric thread - Guideline values for hole diameters
DIN 7500-2 
• 紧固件供货技术条件—米制螺纹—性能等级为10.9级的螺纹滚成自攻螺钉 Technical delivery conditions for fasteners - Metric thread rolling screws of property class 10.9
DIN 267-30 
• 十字槽盘头凸缘自攻螺钉 Cross recessed pan head tapping screws with collar
DIN 968 
• 六角凸缘自攻螺钉 Hexagon washer head tapping screws
DIN 6928 
• 自攻螺钉用螺纹 Tapping screw threads
DIN EN ISO 1478 | 代替DIN 7970 
• 六角头自攻螺钉 Hexagon head tapping screws
ISO 1479 | 代替DIN 7976 
• 开槽盘头自攻螺钉 Slotted pan head tapping screws
ISO 1481 | 代替DIN 7971 
• 开槽沉头自攻螺钉（通用头型） Slotted countersunk(flat)head tapping screws(common head style)
ISO 1482 | 代替DIN 7972 
• 开槽半沉头自攻螺钉（通用头型） Slotted raised countersunk (oval) head tapping screws(common head style)
ISO 1483 | 代替DIN 7973 
• 十字槽盘头自攻螺钉 Cross recessed pan head tapping screws
ISO 7049 | 代替DIN 7981 
木螺钉 
• 开槽半沉头木螺钉 Slotted raised countersunk(oval) head wood screws
Din 95 
• 开槽半圆头木螺钉 Slotted round head wood screws
Din 96 
• 开槽沉头木螺钉 Slotted countersunk(flat) head wood screws
Din 97 
• 六角头木螺钉 Hexagon wood screws
Din 571 
• 十字沉头木螺钉 Cross recessed countersunk (flat) head wood screws
DIN 7997 
螺杆和螺柱 
• 牙条 Threaded rod
DIN 975 
• 螺杆 Metric thread stud bolts
DIN 976-1 
• 螺杆— Metric interference-fit thread stud bolts
DIN 976-2 
• Welding studs for turnbuckles
DIN 34828 
• High-strength structural bolting assemblies. For preloading
DIN EN 14399-3 
• High-strength structural bolting assemblies. For preloading
DIN EN 14399-4 
• Hexagon bolts with flange-Small series
DIN EN 1662 
• Hexagon bolts with flange-Heavy series
DIN EN 1665 
• Hexagon bolts with flange with metric fine pitch thread
DIN EN 14219 
• High-strength structural bolting assemblies for preloading
DIN EN 14399-3 
• High-strength structural bolting assemblies for preloading
DIN EN 14399-4 
• Hexagon head bolts with reduced shank
DIN EN 24015 
• Hexagon head bolts(Product grade A and B)
DIN EN ISO 4014 
• Hexagon head bolts(Product grade C)
DIN EN ISO 4016 
Rivet 

• 半圆头钢铆钉—公称直径10~36mm Steel round head rivets with nominal diameters from 10 to 36 mm
DIN 124 
• 沉头钢铆钉—公称直径10~36mm Steel countersunk head rivets with nominal diameters from 10 to 36 mm
DIN 302 
• 半圆头铆钉—公称直径1~8mm Round head rivets with nominal diameters from 1 to 8 mm
DIN 660 
• 沉头铆钉—公称直径1~8mm Countersunk head rivets with nominal diameters from 1 to 8 mm
DIN 661 
• 半沉头铆钉—公称直径1.6~6mm Oval-head rivets with nominal diameters from 1,6 to 6 mm
DIN 662 
• 大半圆头铆钉—公称直径1.6~6mm Mushroom head rivets with nominal diameters from 1,6 to 6 mm
DIN 674 
• 沉头铆钉—公称直径3~5mm Flat countersunk head rivets with nominal diameters from 3 to 5 mm
DIN 675 
• 铆钉用具 Rivet sets
DIN 6434 
• 盘头半空心铆钉—公称直径1.6~10mm Semitubular pan head rives with nominal diameters from 1,6 to 10 mm
DIN 6791 
• 沉头半空心铆钉—公称直径1.6~10mm Semitubular countersunk head rivets with nominal diameters from 1,6 to 10 mm
DIN 6792 
• 冲制铆钉 Compression rivets
DIN 7331 
• 开口型盲铆钉 Break mandrel blind rivets
DIN 7337 
• 开口型和封闭型铆钉 Break and clutch lining rivets
DIN 7338 
• 板料拉延管铆钉 One-piece tubular rivets drawn from strip
DIN 7339 
• 管制空心铆钉 Tubular rivets made from tube
DIN 7340 
• Steel round head rivets
DIN 124 
• Round head rivets
DIN 660 
• Countersunk head rivets
DIN 661 
• Oval-head rivets
DIN 662 
• Mushroom head rivets
DIN 674 
• Flat countersunk head rivets
DIN 675 
• Semitubular pan head rivets. With nominal diameters from 1,6 to 10mm
DIN 6791 
• Compression rivets
DIN 7331 
• Brake and clutch lining rivets
DIN 7338 
• One-piece tubular rivets
DIN 7339 
• Tubular rivets
DIN 7340 
• Rivet pins
DIN 7341 
• Grooved pins with countersunk head
DIN EN ISO 8747 
Nuts  
• 非金属嵌件六角法兰面锁紧螺母 Prevailing torque type hexagon nuts with flange(with non-metallic insert)
DIN EN 1663 | 代替DIN 6926 
• 非金属嵌件六角锁紧薄螺母 Prevailing torque type hexagon thin nuts (with non-metallic insert )
DIN EN ISO 10511 | 代替DIN 985 
• 钢结构用—大六角螺母 Steel hexagon nuts with large widths across flats for high - strength structural bolting
DIN 6915 
• 塑料六角螺母 Plastic hexagon nuts
DIN 34814 
• 六角法兰面螺母 Hexagon nuts with flange
DIN EN 1661 | 代替DIN 6923 
• 1型六角螺母—产品等级A和B级 Hexagon nuts,style 1-Product grades A and B
DIN EN ISO 4032 | 代替DIN 934 
• 2型六角螺母—产品等级A和B级 Hexagon nuts,style 2-Product grades A and B
DIN EN ISO 4033 
• 六角螺母—产品等级C级 Hexagon nuts - Product grade C
DIN EN ISO 4034 | 代替DIN 555 
• 方螺母—产品等级C级 Product grade C square nuts
DIN 557 
• 薄型方螺母—产品等级B级 Square thin nuts - Product grade B
DIN 562 
• 六角薄螺母（倒角型）—产品等级A和B级 Hexagon thin nuts(chamfered)-Product grade A and B
DIN EN ISO 4035 | 代替DIN 439-2 
• 六角薄螺母（无倒角型）—产品等级B级 Hexagon thin nuts - Product grade B(unchamfered)
DIN EN ISO 4036 | 代替DIN 439-1 
• 1型六角螺母—细牙螺纹—产品等级A和B级 Hexagon nuts,style 1,with metric fine pitch thread - Product grades A and B
DIN EN ISO 8673 | 代替DIN 934|DIN 971-1 
• 2型六角螺母—细牙螺纹—产品等级A和B级 Hexagon nuts,style 2,with metric fine pitch thread - Product grades A and B
DIN EN ISO 8674 | 代替DIN 971-2 
• 六角薄螺母—细牙螺纹—产品等级A和B级 Hexagon thin nuts with metric fine pitch thread - Product grades A and B
DIN EN ISO 8675 | 代替DIN 439-2 
• 六角开槽螺母—粗牙螺纹和细牙螺纹—产品等级A和B级 Hexagon slotted nuts and caltle nuts with metric coarse and fine pitch thread - Product grades A and B
DIN 935-1 
• 六角开槽螺母—产品等级C级 Hexagon slotted nuts with metric coarse pitch thread - Product grade C
DIN 935-3 
• 六角开槽薄螺母—产品等级A和B级 Hexagon thin slotted nuts and castle nuts with metric coarse and fine pitch thread - Product grade A and B
DIN 979 
• 六角盖形螺母—扁球型 Hexagon cap nuts
DIN 917 
• 六角盖形螺母—半圆球型 Hexagon domed cap nuts
DIN 1587 
• 非金属嵌件六角组合式盖形锁紧螺母 Prevailing torque hexagon domed cap nuts with non-metallic insert
DIN 986 
• 1型全金属六角锁紧螺母—性能等级5、8和10级 Prevailing torque type all-metal hexagon nuts,style 1- Property classes 5,8 and 10
DIN EN ISO 7719 
• 开槽螺塞(螺纹塞） Screwed inserts(screw plugs)
DIN 7965 
• 冲压自锁螺母 Self-locking counter nuts
DIN 7967 
• 三角凸缘螺母—矿山用防雷防爆电气设备用 Triangular nuts for use with electrical equipment in mining
DIN 22425 
• 小对边薄螺母—粗牙和细牙 Thin nuts with coarse pitch and fine pitch thread and with small widths across flats
DIN 80705 
• 全金属六角法兰面锁紧螺母 Prevailing torque type all-metal hexagon nuts with flange
DIN EN 1664 | 代替DIN 6927 
• 非金属嵌件六角法兰面锁紧螺母－细牙 Prevailing torque type hexagon nuts with flange(with non-metallic insert)with metric fine pitch thread
DIN EN 1666 | 代替DIN 6926 
• 全金属六角法兰面锁紧螺母－细牙 Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread
DIN EN 1667 | 代替DIN 6927 
• 1型非金属嵌件六角锁紧螺母—性能等级5、8和10级 Prevailing torque type hexagon nuts (with non-metallic insert),style 1 - Property classes 5,8 and 10
DIN EN ISO 7040 | 代替DIN 982|DIN 6924 
• 2型全金属六角锁紧螺母—性能等级5、8、10和12级 Prevailing torque type all-metal hexagon nuts,style 2 - Property classes 5,8, 10 and 12
DIN EN ISO 7042 | 代替DIN 980|DIN 6925 
• 1型非金属嵌件六角锁紧螺母—细牙—性能等级6、8和10级 Prevailing torque type hexagon nuts (with non-metallic insert),style 1,with metric fine pitch thread-Property classes 6,8 and 10
DIN EN ISO 10512 | 代替DIN 982|DIN 6924 
• 2型全金属六角锁紧螺母—细牙—性能等级8、10和12级 Prevailing torque type all-metal hexagon nuts,style 2,with metric fine pitch thread - Property classes 8,10 and 12
DIN EN ISO 10513 | 代替DIN 980|DIN 6925 
• 焊接方螺母 Square weld nuts
DIN 928 
• 焊接六角螺母 Hexagon weld nuts
DIN 929 
• 焊接六角法兰面螺母 Hexagon weld nuts with flange
DIN 977 
• 圆头滚花螺母 Knurled nuts with collar
DIN 466 
• 圆头滚花薄螺母 Knurled nuts
DIN 467 
• 厚圆头滚花螺母 Knurled nuts
DIN 6303 
• 蝶形螺母—方翼 Wing nuts with edged wings
DIN 314 
• 蝶形螺母—圆翼 Wing nuts with rounded wings
DIN 315 
• 管螺母—螺纹符合ISO 228-1 Pipe nuts with thread as in ISO 228-1
DIN 431 
• 圆螺母—端面开槽 Slotted round nuts
DIN 546 
• 圆螺母—端面带孔 Round nuts with drilled holes in one face
DIN 547 
• 圆螺母—恻面带孔 Round nuts with set pin holes in side
DIN 548 
• 吊耳螺母 Lifting eye nuts
DIN 582 
• 圆型套筒螺母—钢制 Turnbuckles made from steel tube or round steel bars
DIN 1478 
• 六角套筒螺母 Hexagon turnbuckles
DIN 1479 
• 套筒螺母—组合开启型 Turnbuckles,forged（open type)
DIN 1480 
• 六角螺母—腰状杆螺栓连接副用 Hexagon nuts for use with bolts with waisted shank
DIN 2510-5 
• 罩螺母—腰状杆螺栓连接副用 Cap nuts for use with bolts with waisted shank
DIN 2510-6 
• 受力管套—腰状杆螺栓连接副用 Sleeves for use with bolts with waisted shank
DIN 2510-7 
• 六角螺母—m=1.5d Hexagon nuts with a height of 1,5d
DIN 6330 
• 六角凸缘螺母—m=1.5d Hexagon collar nuts with a height of 1,5d
DIN 6331 
• 专用地脚螺钉用地脚螺母 
DIN 798-1972 
• 六角薄螺母（老标准）（产品等级A和B级） 
DIN 936-1985 
• 六角冕形薄螺母（原类型） 
DIN 937-1987 
• 六角开槽薄螺母和六角冕形薄螺母米制粗牙和细牙产品等级A和B级 
DIN 979-1987 
• 汽车和拖车用圆盘轮螺母螺柱定心用紧固件 
DIN 74361-1982 第2部分 
• 载重汽车和拖挂车的圆盘轮外部件紧固件 
DIN 74361-1979 第3部分 
• Wing nuts with edged wings
DIN 314 
• Pipe nuts with thread as in ISO 228-1
DIN 431 
• Knurled nuts with collar
DIN 466 
• Short knurled nuts
DIN 467 
• Slotted round nuts
DIN 546 
• Round nuts with drilled holes in one face
DIN 547 
• Round nuts with set pin holes in side
DIN 548 
• Product grade C square nuts
DIN 557 
• Square thin nuts
DIN 562 
• Eyenuts for lifting purposes
DIN 582 
• Hexagon cap nuts
DIN 917 
• Overview of European Standards for fasteners
DIN 918 
• Square weld nuts
DIN 928 
• Hexagon weld nuts
DIN 929 
• Hexagon slotted nuts and castle nuts with metric coarse and fine pitch thread(Product grade A and B)
DIN 935-1 
• Hexagon slotted nuts with metric coarse pitch thread(Product grade C)
DIN 935-3 
• Hexagon thin slotted nuts and castle nuts with metric coarse and fine pitch thread(Product grade A and B)
DIN 979 
• Prevailing torque type hexagon domed cap nuts with non-metallic insert
DIN 986 
• Hexagon domed cap nuts
DIN 1587 
• Boloted connections with reduced shank hexagon nuts
DIN 2510 
• Knurled nuts
DIN 6303 Fastener Standard
• Hexagon nuts with a height of 1,5 d
DIN 6330 
• Hexagon nuts with collar,with a height of 1,5 d
DIN 6331 
• Plastic hexagon nuts
DIN 34814 
• Plastic washers. large series
DIN 34816 
• Thin nuts with coarse pitch and fine pitch thread and with small widths across flats
DIN 80705 
• Hexagon nuts with flange
DIN EN 1661 
• Prevailing torque type hexagon nuts with flange(with non-metallic insert)
DIN EN 1663 
• Prevailing torque type all-metal hexagon nuts with flange
DIN EN 1664 
• Prevailing torque type hexagon nuts with flange(with non-metallic insert),with metric fine pitch thread
DIN EN 1666 
• Prevailing torque type all-metal hexagon nuts with flange,with metric fine pitch thread
DIN EN 1667 
• Hexagon nuts with flange. Fine pitch thread
DIN EN 14218 
• Hexagon nuts,style 1(Product grades A and B)
DIN EN ISO 4032 
• Hexagon nuts,style 2(Product grades A and B)
DIN EN ISO 4033 
• Hexagon nuts(Product grades C)
DIN EN ISO 4034 
• Hexagon thin nuts(chamfered)(Product grades A and B)
DIN EN ISO 4035 
• Hexagon thin nuts(unchamfered)(Product grades B)
DIN EN ISO 4036 
• Tolerances for fasteners
DIN EN ISO 4759 
• Prevailing torque type hexagon nuts(with non-metallicinsert),style 1 Property classes5,8 and 10
DIN EN ISO 7040 
• Prevailing torque type hexagon nuts(with non-metallicinsert),style 2 -Property classes 5,8,10 and 12
DIN EN ISO 7042 
• Hexagon nuts,style 1,with metric fine pitch thread (Product grades B)
DIN EN ISO 8673 
• Hexagon nuts,style 2,with metric fine pitch thread (Product grades A and B)
DIN EN ISO 8674 
• Prevailing torque type hexagon thin nuts(with non-metallic insert)
DIN EN ISO 10511 
• Prevailing torque type all-metal hexagon nuts,style 1 Property classes 5,8 and 10
DIN EN ISO 7719 
• Hexagon thin nuts (chamfered)with metric fine pitch thread(Product grades A and B)
DIN EN ISO 8675 
• Prevailing torque type hexagon nuts(with non-metallic insert),style 1,with metric fine pitch thread-Property classes6,8 and 10
DIN EN ISO 10512 
• Prevailing torque type all-metal hexagon nuts,style 2,with metric fine pitch thread-Property classes8,10 and 12
DIN EN ISO 10513 
• Hexagon weld nuts with flange
DIN EN ISO 21670 
• Bolted connections with reduced shank
DIN 2510 
• 非钎焊和钎焊压合接头.管接螺母系列LL Non-soldering and soldering compression fittings - Union nuts series LL
3870-2001 | 代替DIN 3870-1985;DIN 3870-19 
Screw 
• 十字槽盘头螺钉—产品等级A级 Pan head screws with type H or type Z cross recess-Product grade A
DIN EN ISO 7045 | 代替DIN 7985 
• 十字槽沉头（通用头型）螺钉－产品等级A级－第1部分：性能等级 钢 4.8级 Countersunk flat head screws (common head style)with type H or type Z cross recess,product grade A-Part 1:Steel of property class 4.8
DIN EN ISO 7046-1 | 代替DIN 965 
Washer

• 弹簧垫圈 (DIN 127) Helical spring lock washers,sprint steel
127 
• 钢制的，普通系列平垫圈 Flat Washers, steel normal series
125B | 代替7090 
• 钢制的，普通系列平垫圈 Flat Washers, steel normal series
125A 
• 方垫圈—木结构用 Square washers for use in timber constructions
DIN 436 
• 方孔方垫圈—木结构用 Washers with square hole for use in timber constructions
DIN 440 
• 粗制平垫圈—螺栓用 Washers,coarse type,or bolts
DIN 1441 
• 精制平垫圈 Washers for clamping devices
DIN 6340 
• 平垫圈—带重型夹紧套螺栓用 Plain washers for bolts with heavy clamping sleeves
DIN 7349 
• 塑料垫圈—标准系列 Plastic washers-Standard series
DIN 34815 
• 塑料垫圈—大系列 Plastic washers-Large series
DIN 34816 
• 销轴用平垫圈—产品等级A级 Plain washers for use with clevis pins-Product grade A
DIN EN 28738 | 代替DIN 1440 
• 平垫圈—标准系列—产品等级A级 Plain washers-Normal series-Product grade A
DIN EN ISO 7089 
• 平垫圈—倒角型—标准系列—产品等级A级 Plain washers,chamfered-Normal series-Product grade A
DIN EN ISO 7090 
• 平垫圈—标准系列—产品等级C级 Plain washers-Normal series-Product grade C
DIN EN ISO 7091 
• 平垫圈—小系列—产品等级A级 Plain washers-Small series-Product grade A
DIN EN ISO 7092 
• 平垫圈—大系列—第一部分：产品等级A级 Plain washers-Large series-Part 1: Product grade A
DIN EN ISO 7093-1 
• 平垫圈—标准系列—第3部分：产品等级C级 Plain washers-Normal series-Part 3: Product grade C
DIN EN ISO 7093-2 
• 平垫圈—特大系列—产品等级C级 Plain washers-Extra large series -Product grade C
DIN EN ISO 7094 
• 长单耳止动垫片 Tab washers with long tab
DIN 93 
• 弹簧垫圈 Curved spring lock washers
DIN 128 
• 波形弹性垫圈 Wave spring washers
DIN 137 
• 外舌止动垫片 External tab washers(locking tab washers)
DIN 432 
• 双耳止动垫片 Tab washers with short and long tab at right angles
DIN 463 
• 安全杯—DIN84开槽圆柱头螺钉用 Safety cups for cheese head screws according to DIN 84
DIN 526 
• 密封垫圈 Shim rings and supporting rings
DIN 988 
• 螺栓、螺母组合件用锥形弹性垫圈 Conical spring washers for bolt/nut assemblies
DIN 6796 
• 锯齿锁紧弹性垫圈 Toothed lock washers
DIN 6797 
• 外锯齿锁紧垫圈 Serrated lock washers
DIN 6798 
• 螺钉和垫圈组合件用波形弹性垫圈 Curved spring washers for screw and washer assemblies
DIN 6904 
• 螺钉和垫圈组合件用弹簧垫圈 Spring lock washers for screw and washer assemblies
DIN 6905 
• 螺钉和垫圈组合件用外锯齿锁紧垫圈 Serrated lock washers with extermal teeth for screw and washer assemblies
DIN 6907 
• 螺钉和垫圈组合件用锥形弹性垫圈 Conical sring washers for screw and washer assemblies
DIN 6908 
• 自攻螺钉和垫圈组合件用平垫圈—标准系列和大系列—产品等级A级 Plain washers for tapping screw and washer assemblies - Normal and large series - Product grade A
DIN EN ISO 10669 
• 螺钉和垫圈组合件用平垫圈—小系列、标准系列及大系列—产品等级A级 Plain washers for screw and washer assemblies - Small,normal and large series - Product grade A
DIN EN ISO 10673 
• 槽钢用方斜垫圈 Square taper washers for use with channel sections
DIN 434 
• I型工字钢用方斜垫圈 Square taper washers for use with I sections
DIN 435 
• 钢结构高强度螺栓连接—圆垫圈 Round washers for high-strength structural steel bolting
DIN 6916 
• 钢结构高强度螺栓连接—I型工字钢用方斜垫圈 Square taper washers for high-strength structural bolting of steel I sections
DIN 6917 
• 钢结构高强度螺栓连接—槽钢用方斜垫圈 Square taper washers for high-strength structural bolting of steel channel sections
DIN 6918 
• 钢结构用垫圈—产品等级C级 Washers for use in structural steelwork - Product grade C
DIN7989-1 
• 钢结构用垫圈—产品等级A级 Washers for use in structural steelwork - Product grade A
DIN7989-2 
• 密封垫圈 Shim rings and supporting rings
DIN 988 
• 平垫圈—重型螺栓用 Plain washers for bolts with heavy clamping sleeves
DIN 7349 
• Shim rings and supporting rings
DIN 988 
• Plain washers. For bolts with heavy clamping sleeves
DIN 7349 
• Blind rivets
DIN EN ISO 14589 
• Square taper steel washers for use with channel sections
DIN 434 
• Square taper steel washers for use with I sections
DIN 435 
• Square washers
DIN 436 
• Washers with square hole for use in timber constructions
DIN 440 
• Shim rings and supporting rings
DIN 988 
• Washers type coarse for bolts
DIN 1441 
• Washers for clamping devices
DIN 6340 
• Conical spring washers. for bolt/nut assemblies
DIN 6796 
• Conical spring washers
DIN 6908 
• Square taper washers. For high-strength structural bolting of steel | sections
DIN 6917 
• Square taper washers. For high-strength structural bolting of steel channel sections
DIN 6918 
• Plain washers. For Bolts with Heavy Clamping Sleeves
DIN 7349 
• Washers for use in structural steelwork(Product grade C)
DIN 7989-1 
• Washers for use in structural steelwork(Product grade A)
DIN 7989-2 
• Chamfered plain washers for use in structural steelwork
DIN 34820 
• High-strength structural bolting assemblies. For preloading
DIN EN 14399-5 
• High-strength structural bolting assemblies. For preloading
DIN EN 14399-6 
• Plain washers-Normal series(Product grades A)
DIN EN ISO 7089 
• Plain washers,chamfered-Normal series(Product grades A)
DIN EN ISO 7090 
• Plain washers-Normal series(Product grades C)
DIN EN ISO 7091 
• Plain washers-Small series(Product grades A)
DIN EN ISO 7092 
• Plain washers-Large series(Product grades A)
DIN EN ISO 7093-1 
• Plain washers-Large series(Product grades C)
DIN EN ISO 7093-2 
• Plain washers-Extra large series(Product grades C)
DIN EN ISO 7094 
• Plain washers for tapping screw and washer assemblies(Product grades A)
DIN EN ISO 10669 
• Plain washers for screw and washer assemblies Small,normal nad large series (Product grades A)
DIN EN ISO 10673 
挡圈 
• 轴用开口弹性挡圈 Lock washers (retaining washers) for shafts
DIN 6799 
• 孔用挡圈—标准型和重型 Circlips (retaining rings) for bores - Normal type and heavy type
DIN 472 
• 轴用挡圈—带外凸耳型 Retaining rings with lugs for use on shafts (external circlips)
DIN 983 
• 轴用钢丝挡圈及挡圈槽 Round wire snap rings and snap ring grooves for shafts and bores
DIN 7993 
• 轴用挡圈—标准型和重型 Circlips (retaining rings)for shafts - Normal type and heavy type
DIN 471 
• 孔用挡圈—带内凸耳型 Spring retaining rings with lugs for use in bores (internal circlips)
DIN 984 
• Circlips(retaining rings)for shafts
DIN 471 
• Circlips(retaining rings)for bores
DIN 472 
• Retaining rings with lugs
DIN 983 
• Spring retaining rings with lugs
DIN 984 
• Lock washers
DIN 6799 
• Round wire snap rings and snap ring grooves. For shafts bores
DIN 7993 
Pin 
• 弹性圆柱销—开槽—轻型 Spring-type straight pins,slotted,light duty
DIN EN ISO 13337 | 代替DIN 7346 
• 重型传动连接楔形键—斜键和键槽型式及尺寸 Stressed-type fastenings with taper action-Taper keys keyways-Dimensions and application
DIN 6886 
• 半圆键和键槽型式及尺寸 Drive-type fastenings without taper action-Woodruff keys-Dimensions and application
DIN 6888 
• 弹性圆柱销—开槽—重型 Spring-type straight pins,slotted,heavy duty
DIN EN ISO 8752 | 代替DIN 1481 
• 机床用平键—传动连接—键和键槽型式及尺寸 Drive-type fastenings without taper action-Parallel keys,keyways,deep pattern for machine tools-Dimensions and application
DIN 6885-2 
• 薄型平键—传动连接—键和键槽型式及尺寸 Drive-type fastenings without taper action-Parallel keys,shallow action-Dimensions and application
DIN 6885-3 
• 弹性开口销 Spring cotters
DIN 11024 
• 开口销 Split pins
DIN EN ISO 1234 | 代替DIN 94 
• 腰型头轴肩销轴 Clevis pins with head and stud end
DIN 1445 
• 圆柱销 Clevis pins without head
DIN EN 22340 | 代替DIN 1443 
• 销轴 Clevis pins with head
DIN EN 22341 | 代替DIN 1444 
• 弯头楔键和键槽型式及尺寸 Taper key torque transmission-Gib-head saddle keys-Dimensions and application
DIN 6889 
• 交变载荷用楔键和楔键槽 Tangential keys and tangential keyways for alternating shock loads
DIN 268 
• 单一载荷用楔键和楔键槽 Tangential keys and tangential keyways for constant loads
DIN 271 
• 平键用钢一型式、尺寸、重量及允许偏差 Bright key steel-Dimensions,permissible variations,weights
DIN 6880 
• 鞍形楔键—扭矩传输—尺寸及安装连接要求 Taper key torque transmission-Saddle keys-Dimensions and application
DIN 6881 
• 楔键—扭矩传输—尺寸及安装连接要求 Taper key torque transmission-Parallel keys-Dimensions and application
DIN 6883 
• 弯头楔键—扭矩传输—尺寸及安装连接要求 Taper key torque transmission-Gib-head parallel keys-Dimensions and application
DIN 6884 
• 平键—传动连接—键和键槽型式及尺寸 Drive-type fastenings without taper action-Parallel keys,keyways,deep pattern
DIN 6885-1 
• 外螺纹圆锥销 Taper pins with thread ends and constant taper lengths
DIN 258 
• 槽销 Grooved pins,half - length grooved,with gorge
DIN 1469 
• 固定销 Rivet pins
DIN 7341 
• 圆锥销—内螺纹 Unhardened taper pins
DIN EN 22339 | 代替DIN 1 
• 内螺纹圆锥销—不淬硬 Unhardened taper pins with internal thread
DIN EN 28736 | 代替DIN 7978 
• 外螺纹圆锥销—不淬硬 Unhardened taper pins with external thread
DIN EN 28737 | 代替DIN 7977 
• 圆柱销—不淬硬钢和奥氏体不锈钢 Parallel pins,of unhardened steel and austenitic stainless steel
DIN EN ISO 2338 | 代替DIN 7 
• 内螺纹圆柱销—不淬硬钢和奥氏体不锈钢 Parallel pins whit internal thread,of unhardened steel and austenitic stainless steel
DIN EN ISO 8733 | 代替DIN 7979 
• 圆柱销－淬硬钢和马氏体不锈钢（定位销） Parallel pins,of hardened steel or martensitic stainless steel(Dowel pins)
DIN EN ISO 8734 | 代替DIN 6325 
• 内螺纹圆柱销－淬硬钢和马氏体不锈钢 Parallel pins with internal thread,of hardened steel and martensitic stainless steel
DIN EN ISO 8735 | 代替DIN 7979 
• 槽销—带导杆及全长平行沟槽 Grooved pins,full - length parallel grooved,with pilot
DIN EN ISO 8739 | 代替DIN 1470 
• 槽销—带倒角及全长平行沟槽 Grooved pins,full - length parallel grooved,with chamfer
DIN EN ISO 8740 | 代替DIN 1473 
• 槽销—半长倒锥槽 Grooved pins,half - length reverse - taper grooved
DIN EN ISO 8741 | 代替DIN 1474 
• 槽销—中部槽长为1/3全长 Grooved pins,one - third -length centre grooved
DIN EN ISO 8742 | 代替DIN 1475 
• 槽销—中部槽长为1/2全长 Grooved pins,half-length centre grooved
DIN EN ISO 8743 
• 槽销—全长锥槽 Grooved pins,full-length taper grooved
DIN EN ISO 8744 | 代替DIN 1471 
• 槽销—半长锥槽 Grooved pins,half-length taper grooved
DIN EN ISO 8745 | 代替DIN 1472 
• 圆头槽销 Grooved pins with round head
DIN EN ISO 8746 | 代替DIN 1476 
• 沉头槽销 Grooved pins with countersunk head
DIN EN ISO 8747 | 代替DIN 1477 
• 弹性圆柱销—卷制—重型 Spring-type straight pins,coiled,heavy duty
DIN EN ISO 8748 | 代替DIN 7344 
• 弹性圆柱销—卷制—标准型 Spring-type straight pins,coiled,standard duty
DIN EN ISO 8750 | 代替DIN 7343 
• 弹性圆柱销卷制轻型 Spring-type straight pins,coiled,light duty
DIN EN ISO 8751 
• 重型传动连接楔形键—弯头斜键和键槽型式及尺寸 Stressed-type fastenings with taper action-Taper keys with gib heads,keyways-Dimensions and application
DIN 6887 
• Taper Pins
DIN 258 
• Tangential keys and Tangential keyways .for Alternating shock loads
DIN 268 
• Tangential Keys and Tangential Keyways .for Constant loads
DIN 271 
• Steel countersunk head rivets
DIN 302 
• Moulding nails
DIN 1163 
• Grooved pins,Half Length Grooved with Gorge
DIN 1469 
• Rivet sets
DIN 6434 
• Bright key steel
DIN 6880 
• Taper key torque transmission
DIN 6881 
• Taper key torque Transmission
DIN 6883 
• Drive Type Fastenings without Taper Action
DIN 6885 
• Stressed-type Fastenins with Taper Action
DIN 6886 
• Stressed-type fastenings with taper action
DIN 6887 
• Drive type fastenings without taper action
DIN 6888 
• Taper key torque transmission
DIN 6889 
• Spring Cotters
DIN 11024 
• Unhardened taper pins
DIN EN 22339 
• Clevis pins without head
DIN EN 22340 
• Clevis pins with head
DIN EN 22341 
• Unhardened taper pins with internal thread
DIN EN 28736 
• Unhardened taper pins with external thread
DIN EN 28737 
• Plain washers for use with clevis pins(product grade A)
DIN EN 28738 
• Determination of shear strength of pins
DIN EN 28739 
• Split pins
DIN EN ISO 1234 
• Parallel pins,of unhardened steel and austenitic stainless steel
DIN EN ISO 2338 
• Parallel pins,of hardened steel or martensitic stainless steel(dowel pins)
DIN EN ISO 8734 
• Parallel pins with internal thread,of unhardened steel and austenitic stainless steel
DIN EN ISO 8733 
• Parallel pins with internal thread,of hardened steel and martensitic stainless steel
DIN EN ISO 8735 
• Grooved pins,full-length parallel grooved,with pilot
DIN EN ISO 8739 
• Grooved pins,full-length parallel grooved,with chamfer
DIN EN ISO 8740 
• Grooved pins,full-length reverse-taper grooved
DIN EN ISO 8741 
• Grooved pins,one-third-length centre grooved
DIN EN ISO 8742 
• Grooved pins,half-length centre grooved
DIN EN ISO 8743 
• Grooved pins,full-length taper grooved
DIN EN ISO 8744 
• Grooved pins,half-length taper grooved
DIN EN ISO 8745 
• Grooved pins,with round head
DIN EN ISO 8746 
• Spring-type straight pins,coiled,heavy duty
DIN EN ISO 8748 
• Spring-type straight pins,coiled,standard duty
DIN EN ISO 8750 
• Spring-type straight pins,coiled,light duty
DIN EN ISO 8751 
• Spring-type straight pins,slotted,heavy duty
DIN EN ISO 8752 
• Spring-type straight pins,slotted,light duty
DIN EN ISO 13337 
• Closed end blind rivets with break pull mandrel and proruding head-AI/A|A
DIN EN ISO 15975 
• Closed end blind rivets with break pull mandrel and proruding head-ST/ST
DIN EN ISO 15976 
• Open end blind rivets with bread pull mandrel and protruding head-A|A/ST
DIN EN ISO 15977 
• Open end blind rivets with bread pull mandrel and protruding head-A|A/ST
DIN EN ISO 15978 
• Open end blind rivets with bread pull mandrel and protruding head-ST/ST
DIN EN ISO 15979 
• Open end blind rivets with bread pull mandrel and countersunk head-ST/ST
DIN EN ISO 15980 
• Open end blind rivets with bread pull mandrel and countersunk head-A|A/A|A
DIN EN ISO 15981 
• Open end blind rivets with bread pull mandrel and countersunk head-A|A/A|A
DIN EN ISO 15982 
• Open end blind rivets with bread pull mandrel and countersunk head-A2/A2
DIN EN ISO 15983 
• Open end blind rivets with bread pull mandrel and countersunk head-A2/A2
DIN EN ISO 15984 
• Open end blind rivets with bread pull mandrel and protruding head-CU/ST or Cu/Bu or Cu/SSt
DIN EN ISO 16582 
• Open end blind rivets with bread pull mandrel and countersunk head-CU/ST or Cu/Br or Cu/SSt
DIN EN ISO 16583 
• Open end blind rivets with bread pull mandrel and protruking head-NiCu/St or NiCu/SSt
DIN EN ISO 16584 
• Open end blind rivets with bread pull mandrel and protruking head-A2/SSt
DIN EN ISO 16585 
• Turnbuckles made from steel tubes or round steel bars
DIN 1478 
• Forged turnbuckles(open type)
DIN 1480 
• Split pins
DIN EN ISO 1234 
组合件和连接副 
• 钢结构用—开槽沉头螺钉和六角螺母连接副 Steel slotted countersunk head screws for structural steel bolting for supply with hexagon nuts
DIN 7969 
• 钢结构用—大六角头铰制孔高强度螺栓和六角螺母连接副 High-strength hexagon fit bolts with large widths across flats for structural steel bolting
DIN 7999 
• 螺钉和波形弹性垫圈的组合件 Screw and washer assemblies - Coarse threaded screws with captive wave spring washer
DIN 6900-2 
• 螺钉和鞍形弹性垫圈的组合件 Screw and washer assemblies - Coarse threaded screws with captive curved spring lock washer
DIN 6900-3 
• 螺钉和锯齿形锁紧弹性垫圈的组合件 Screw and washer assemblies - Coarse threaded screws with captive serrated lock washer
DIN 6900-4 
• 螺钉和锥形弹性垫圈的组合件 Screw and washer assemblies - Coarse threaded screws with captive conical spring washer
DIN 6900-5 
• 螺钉和锥形弹性垫圈的组合件—垫圈硬度200HV 和300HV Screw and washer assemblies with plain washers-Washer hardness classes 200HV and 300HV
DIN EN ISO 10644 
• 双头螺柱—旋入端长度≈2d Studs with a length of engagement equal to about 2d
DIN 835 
• 双头螺柱—旋入端长度≈1d Studs with a length of engagement equal to about 1d
DIN 938 
• 双头螺柱—旋入端长度≈1.25d Studs with a length of engagement equal to about 1,25d
DIN 939 
• 双头螺柱—旋入端长度≈2.5d Studs with a length of engagement equal to about 2,5d
DIN 940 
• 双头螺柱—旋入端长度≈2d—过盈配合螺纹（A型） Metric interference-fit thread studs with a length of engagement equal to about 2d(type A)
DIN 949-1 
• 双头螺柱—旋入端长度≈2.5d—过盈配合螺纹（B型） Metric interference-fit thread studs with a length of engagement equal to about 2,5d(type B)
DIN 949-2 
• 自攻螺钉和平垫圈组合件 Tapping screw and washer assemblies with plain washers
DIN EN ISO 10510 
• Hexagon turnbuckles
DIN 1479 
• Screw and washer assemblies
DIN 6900-5 
• Screwed Ineerts(screw plugs)
DIN 7965 
钉子 
• 射钉 Round plain head nails for use in automatic nailing machines
DIN 1143-1 
• 木钉—用于刨花合成板 Nails for the installation of wood wool composite panels
DIN 1144 
• 平头和沉头钢钉 Round plain head and countersunk head wire nails
DIN 1151 
• 圆柱头钢钉 Round lost head wire nails
DIN 1152 
• 钢钉—用于装饰 Decorator's tacks
DIN 1157 
• 墙弯钉 Wall hooks
DIN 1158 
• 大头和石板瓦钉 Clout or slate nails
DIN 1160 
• 模用长钉 Moulding nails
DIN 1163 
• 钢钉—用于石膏板固定 Accessories for the installation of gypsum plasterboard-Nails
DIN 18182-4 
• 钢钉—用于木托盘固定 Nails for assembling timber pallets
DIN 68163 
• Round plain head nails
DIN 1143 
• Decorator's tacks
DIN 1157 
• Wall hooks
DIN 1158 
• Accessories. For the installation of gypsum plasterboard
DIN 18182 
• Nails for assembling timber pallets
DIN 68163 
• Steel wire nails
DIN EN 10230-1